LabTIE Powder Dispensers are used for dispensing powders or (micro) beads in plates, tubes or vials. Dispensing range between 1uL/1mg until 1500uL/1.5gram filling a plate or rack with tubes in approximately 30_seconds . Custom versions available.

In Stock
Compatible With

Snap cap Screw cap
1.5mL 2.0mL 1.5mL 2.0mL

The 45-tube Powder Dispenser is used to dispense your required amount of powder in 45 tubes placed in a BioSpec tube holder.


LabTIE Services


Description

Product Information

Our Dispenser KIT is used to quickly dispense Seeds, Beads, Microbeads and/or Powders in industry standard plates, tubes, vials or various trays on Agar, Blot paper, Soil etc. Due to the modular design of exchangeable Mesh Plates the Dispenser can be used to dispense a variety of sizes, amounts and volumes.

  • Seeds 2mm – 9.0mm
  • Beads 3mm – 6.0mm
  • Powders 1uL/1mg – 1500uL/1.5gr

Each Dispenser is designed, produced and tested by our own Tech Division and custom made to the requirements of our customer. Our Dispensers are used all over the world in research laboratories, universities, pharmaceutical– and biochemical laboratories, institutes and by seed breeding companies.

Mostly Used For

  • Analysis of dry powder by mass
  • Accurate pre-loading powders
  • Grinding tissue samples with micro-beads

Due to its modular design with exchangeable mesh plates it is used to dispense multiple volumes. While typical lab applications require an analytical scale to weigh off each individual sample per well, which is time-consuming and very ineffective, we were able to create a handy tool that solves this problem.

The biggest value offered by the LabTIE Powder Dispenser is the huge timesaving it achieves, up to 150x or higher, allowing lab researchers to spend more time on what really matters, while at the same time reducing costs. It also drastically reduces the margin of error.

Powder Compatibility

   

LabTIE Powder Dispensers are capable of dispensing a large variety if different volumes of powders between 1 µL - 1000 µL.

Examples:
10 µL
50 µL
66 µL
133 µL
500 µL
and many more.

Powder type or quantity not listed? Ask for a Quotation.

In Stock
Compatible With

Microtiter Deep well Strips
96-well 96-well 96-well

The 96-well Powder Dispenser is used to dispense your specific amount of powder in microtiter, deep well plates and strips.


LabTIE Services


Description

Product Information

Our Dispenser KIT is used to quickly dispense Seeds, Beads, Microbeads and/or Powders in industry standard plates, tubes, vials or various trays on Agar, Blot paper, Soil etc. Due to the modular design of exchangeable Mesh Plates the Dispenser can be used to dispense a variety of sizes, amounts and volumes.

  • Seeds 2mm – 9.0mm
  • Beads 3mm – 6.0mm
  • Powders 1uL/1mg – 1500uL/1.5gr

Each Dispenser is designed, produced and tested by our own Tech Division and custom made to the requirements of our customer. Our Dispensers are used all over the world in research laboratories, universities, pharmaceutical– and biochemical laboratories, institutes and by seed breeding companies.

Mostly Used For

  • Analysis of dry powder by mass
  • Accurate pre-loading powders
  • Grinding tissue samples with micro-beads

Due to its modular design with exchangeable mesh plates it is used to dispense multiple volumes. While typical lab applications require an analytical scale to weigh off each individual sample per well, which is time-consuming and very ineffective, we were able to create a handy tool that solves this problem.

The biggest value offered by the LabTIE Powder Dispenser is the huge timesaving it achieves, up to 150x or higher, allowing lab researchers to spend more time on what really matters, while at the same time reducing costs. It also drastically reduces the margin of error.

Powder Compatibility

   

LabTIE Powder Dispensers are capable of dispensing a large variety if different volumes of powders between 1 µL - 1000 µL.

Examples:
10 µL
50 µL
66 µL
133 µL
500 µL
and many more.

Powder type or quantity not listed? Ask for a Quotation.

In Stock
Compatible With

   
  Microtiter and Deep well  
  384-well  

The 384-well Powder Dispenser is used to dispense your specific amount of powder in a 384-well microtiter plate.


LabTIE Services


Description

Product Information

Our Dispenser KIT is used to quickly dispense Seeds, Beads, Microbeads and/or Powders in industry standard plates, tubes, vials or various trays on Agar, Blot paper, Soil etc. Due to the modular design of exchangeable Mesh Plates the Dispenser can be used to dispense a variety of sizes, amounts and volumes.

  • Seeds 2mm – 9.0mm
  • Beads 3mm – 6.0mm
  • Powders 1uL/1mg – 1500uL/1.5gr

Each Dispenser is designed, produced and tested by our own Tech Division and custom made to the requirements of our customer. Our Dispensers are used all over the world in research laboratories, universities, pharmaceutical– and biochemical laboratories, institutes and by seed breeding companies.

Mostly Used For

  • Analysis of dry powder by mass
  • Accurate pre-loading powders
  • Grinding tissue samples with micro-beads

Due to its modular design with exchangeable mesh plates it is used to dispense multiple volumes. While typical lab applications require an analytical scale to weigh off each individual sample per well, which is time-consuming and very ineffective, we were able to create a handy tool that solves this problem.

The biggest value offered by the LabTIE Powder Dispenser is the huge timesaving it achieves, up to 150x or higher, allowing lab researchers to spend more time on what really matters, while at the same time reducing costs. It also drastically reduces the margin of error.

Powder Compatibility

   

LabTIE Powder Dispensers are capable of dispensing a large variety if different volumes of powders between 1 µL - 1000 µL.

Examples:
10 µL
50 µL
66 µL
133 µL
500 µL
and many more.

Powder type or quantity not listed? Ask for a Quotation.

In Stock
Compatible With

   
  Autosamples (GC) vials  
  1.5 - 2 and 5mL  

The 12-GC Vial Powder Dispenser is used to dispense your specific amount of powder in 2mL autosampler (GC) vials.


LabTIE Services


Description

Product Information

Our Dispenser KIT is used to quickly dispense Seeds, Beads, Microbeads and/or Powders in industry standard plates, tubes, vials or various trays on Agar, Blot paper, Soil etc. Due to the modular design of exchangeable Mesh Plates the Dispenser can be used to dispense a variety of sizes, amounts and volumes.

  • Seeds 2mm – 9.0mm
  • Beads 3mm – 6.0mm
  • Powders 1uL/1mg – 1500uL/1.5gr

Each Dispenser is designed, produced and tested by our own Tech Division and custom made to the requirements of our customer. Our Dispensers are used all over the world in research laboratories, universities, pharmaceutical– and biochemical laboratories, institutes and by seed breeding companies.

Mostly Used For

  • Analysis of dry powder by mass
  • Accurate pre-loading powders
  • Grinding tissue samples with micro-beads

Due to its modular design with exchangeable mesh plates it is used to dispense multiple volumes. While typical lab applications require an analytical scale to weigh off each individual sample per well, which is time-consuming and very ineffective, we were able to create a handy tool that solves this problem.

The biggest value offered by the LabTIE Powder Dispenser is the huge timesaving it achieves, up to 150x or higher, allowing lab researchers to spend more time on what really matters, while at the same time reducing costs. It also drastically reduces the margin of error.

Powder Compatibility

   

LabTIE Powder Dispensers are capable of dispensing a large variety if different volumes of powders between 1 µL - 1000 µL.

Examples:
10 µL
50 µL
66 µL
133 µL
500 µL
and many more.

Powder type or quantity not listed? Ask for a Quotation.

In Stock
Compatible With

   
  Autosamples (GC) vials  
  1.5 - 2 and 5mL  

The 24-GC Vial Powder Dispenser is used to dispense your specific amount of powder in 2mL autosampler (GC) vials.


LabTIE Services


Description

Product Information

Our Dispenser KIT is used to quickly dispense Seeds, Beads, Microbeads and/or Powders in industry standard plates, tubes, vials or various trays on Agar, Blot paper, Soil etc. Due to the modular design of exchangeable Mesh Plates the Dispenser can be used to dispense a variety of sizes, amounts and volumes.

  • Seeds 2mm – 9.0mm
  • Beads 3mm – 6.0mm
  • Powders 1uL/1mg – 1500uL/1.5gr

Each Dispenser is designed, produced and tested by our own Tech Division and custom made to the requirements of our customer. Our Dispensers are used all over the world in research laboratories, universities, pharmaceutical– and biochemical laboratories, institutes and by seed breeding companies.

Mostly Used For

  • Analysis of dry powder by mass
  • Accurate pre-loading powders
  • Grinding tissue samples with micro-beads

Due to its modular design with exchangeable mesh plates it is used to dispense multiple volumes. While typical lab applications require an analytical scale to weigh off each individual sample per well, which is time-consuming and very ineffective, we were able to create a handy tool that solves this problem.

The biggest value offered by the LabTIE Powder Dispenser is the huge timesaving it achieves, up to 150x or higher, allowing lab researchers to spend more time on what really matters, while at the same time reducing costs. It also drastically reduces the margin of error.

Powder Compatibility

   

LabTIE Powder Dispensers are capable of dispensing a large variety if different volumes of powders between 1 µL - 1000 µL.

Examples:
10 µL
50 µL
66 µL
133 µL
500 µL
and many more.

Powder type or quantity not listed? Ask for a Quotation.

In Stock
Compatible With

Greiner Corning ThermoF
24-well 24-well 24-well

The 24-well Powder Dispenser is used to dispense your specific amount of powder in a 24-well cell culture plate


LabTIE Services


Description

Product Information

LabTIE Powder Dispensers are used for dispensing various volumes of powders or micro-beads in industry standard plates.

Our Dispenser KIT is used to quickly dispense Seeds, Beads, Microbeads and/or Powders in industry standard plates, tubes, vials or various trays on Agar, Blot paper, Soil etc. Due to the modular design of exchangeable Mesh Plates the Dispenser can be used to dispense a variety of sizes, amounts and volumes.

  • Seeds 2mm – 9.0mm
  • Beads 3mm – 6.0mm
  • Powders 1uL/1mg – 1500uL/1.5gr

Each Dispenser is designed, produced and tested by our own Tech Division and custom made to the requirements of our customer. Our Dispensers are used all over the world in research laboratories, universities, pharmaceutical– and biochemical laboratories, institutes and by seed breeding companies.

Mostly Used For

  • Analysis of dry powder by mass
  • Accurate pre-loading powders
  • Grinding tissue samples with micro-beads

Due to its modular design with exchangeable mesh plates it is used to dispense multiple volumes. While typical lab applications require an analytical scale to weigh off each individual sample per well, which is time-consuming and very ineffective, we were able to create a handy tool that solves this problem.

The biggest value offered by the LabTIE Powder Dispenser is the huge timesaving it achieves, up to 150x or higher, allowing lab researchers to spend more time on what really matters, while at the same time reducing costs. It also drastically reduces the margin of error.

Powder Compatibility

   

LabTIE Powder Dispensers are capable of dispensing a large variety if different volumes of powders between 1 µL - 1000 µL.

Examples:
10 µL
50 µL
66 µL
133 µL
500 µL
and many more.

Powder type or quantity not listed? Ask for a Quotation.

In Stock
Compatible With

Greiner Corning ThermoF
48-well 48-well 48-well

The 48-well Powder Dispenser is used to dispense your specific amount of powder in a 48-well cell culture plate.


LabTIE Services


Description

Product Information

Our Dispenser KIT is used to quickly dispense Seeds, Beads, Microbeads and/or Powders in industry standard plates, tubes, vials or various trays on Agar, Blot paper, Soil etc. Due to the modular design of exchangeable Mesh Plates the Dispenser can be used to dispense a variety of sizes, amounts and volumes.

  • Seeds 2mm – 9.0mm
  • Beads 3mm – 6.0mm
  • Powders 1uL/1mg – 1500uL/1.5gr

Each Dispenser is designed, produced and tested by our own Tech Division and custom made to the requirements of our customer. Our Dispensers are used all over the world in research laboratories, universities, pharmaceutical– and biochemical laboratories, institutes and by seed breeding companies.

Mostly Used For

  • Analysis of dry powder by mass
  • Accurate pre-loading powders
  • Grinding tissue samples with micro-beads

Due to its modular design with exchangeable mesh plates it is used to dispense multiple volumes. While typical lab applications require an analytical scale to weigh off each individual sample per well, which is time-consuming and very ineffective, we were able to create a handy tool that solves this problem.

The biggest value offered by the LabTIE Powder Dispenser is the huge timesaving it achieves, up to 150x or higher, allowing lab researchers to spend more time on what really matters, while at the same time reducing costs. It also drastically reduces the margin of error.

Powder Compatibility

   

LabTIE Powder Dispensers are capable of dispensing a large variety if different volumes of powders between 1 µL - 1000 µL.

Examples:
10 µL
50 µL
66 µL
133 µL
500 µL
and many more.

Powder type or quantity not listed? Ask for a Quotation.