LabTIE Powder Dispensers
Simple. Fast. Reliable.

Information

How does it work?

LabTIE Powder Dispenser is a manual, flexible, accurate Dispenser with exchangeable Meshplates to Dispense your specific amount of powder in volume and weight per tube or vial. It was invented 8 years ago by LabTIE and developed to replace manual loading by hand and traditionally using a weighing scale. The Dispenser loads and drops your Powder accuratly. By simply inserting your desired metal volume Meshplate, you are able to dispense exactly the amount of Powder based on volume and therefore your desired weight. The amounts that can be Dispensed are between 2mg until 10.000 mg (10gram) loaded per vial. Most of the metal Meshplates are considered to be our standard selection such as a 10uL Meshplate, 25, 50, 100, 200uL and so forth, however if you have the desire to dispense a different amount or specific weight than listed, just select the Custom Made Meshplate option and fill in your required volume to dispense. We will mill and anodize the Meshplate to your specifications. Dispensing is as easy to fill your entire rack with vials just within 30 seconds.

Your Dispenser is able to Dispense any type of Powder with an accurately within a maximum <3% error range, exceeding other high volume Powder Dispensing systems. Expand your production output in tubes, vials and plates, speeding up your process over 120 times instantly.

Advantages

Finish your experiments faster
Filling Tubes, Vials, Plates etc in only 30 seconds
Achieve accurate results
Sterile Dispensing
Start larger experiments
Accurate dispensing, <3% error rate
Easy cleaning
Reduces wrist pains
Exchangeable Powder Volume Meshplates, “Different volume or weight? Just slide in a different Meshplate

Custom made Meshplates available

Compatibility

Type of Containers

45-Tubes (1.5 and 2mL screwcap and snapcap tubes)
48-Tubes (1.5 and 2mL screwcap and snapcap tubes)
96-well Microtiter plates
96-Deepwell plates
384-well plates
Custom containers

Example of Custom made dispensers:

96-PCR strip
6-Containers/Beakers
4 - 6 and 12 x 50mL centrifugeTubes
12 x 15mL centrifuge tubes
2mL GC autosamples Vials
Special and confidential canisters

Cutom made to your wishes?
Contact us at

Ask a Question

General Information

The LabTIE Powder Dispenser is widely used to dispense all types of powders into: Vessels, vials, tubes or plates for small experiments and high throughput assays. Options are unlimited, for example: A Dispenser with a metal Volume Meshplate that can Dispenser 55mg of Powder A. Or a specific metal Volume Meshplate that is able to Dispense 500uL of your Powder.

Want to Dispense a specific weight instead of Volume?
Please contact us and send the powder to our company address. We will calculate your powder weight to volume ratio and design the Meshplate to Dispense your required powder mass per tube/well

Beating all current systems in flexibility, accuracy and speed.

The LabTIE Powder Dispenser is widely used to dispense a specific weight in volume of powder into vessels, vials, tubes or plates for small experiments and high throughput assays. Dispensing a powder can be done using an analytical scale which is time-consuming and error-prone or using a powder dispensing robot which is slow and high in price. That is where the LabTIE Powder Dispenser comes in with its accuracy, speed and low in cost. The LabTIE Powder is being use in a broad range in research institutes, Life Science companies and pharma. Assays range from DNA extraction, pre-filling vials for HPLC assays, toxicity assays until filling pharmaceutical grade compounds in pills for studies. A broad range of professional references, inspired by its accuracy, speed and flexibility.