LabTIE Powder Dispensers
Simple. Fast. Reliable.

96Well%20Powder%20Dispenser_edited.jpg

Powder Dispensers

Allowing for accurate and quick Powder Dispensing in a large variety of volumes

45 Tube Bead Dispenser.jpg
100Well Seed Dispenser.jpg
25 Tubes Freeze-dried OP50.JPG
mbb96 var spd quarter pic (1).jpg

Bead Dispensers

Seed Dispensers

C.elegans Reagents

C.elegans Instruments

Grinding Media

Bead Beaters

From our Bead Dispenser series. Dispensing beads and grinding media quick in plates, vials or canisters

Compatible over 120+ Seed types, allowing the user to Dispenser single or multiple seeds per action

A large selection of Reagents and consumables for your C.elegans experiments

High quality Grinding media, beads and balls for disruption assays

Bead Beaters supporting your grinding assays

Information

navigate-right.png

How does it work?

LabTIE Powder Dispenser is a manual, flexible, accurate Dispenser with exchangeable Meshplates to Dispense your specific amount of powder in volume and weight per tube or vial. It was invented 8 years ago by LabTIE and developed to replace manual loading by hand and traditionally using a weighing scale. The Dispenser loads and drops your Powder accuratly. By simply inserting your desired metal volume Meshplate, you are able to dispense exactly the amount of Powder based on volume and therefore your desired weight. The amounts that can be Dispensed are between 2mg until 10.000 mg (10gram) loaded per vial. Most of the metal Meshplates are considered to be our standard selection such as a 10uL Meshplate, 25, 50, 100, 200uL and so forth, however if you have the desire to dispense a different amount or specific weight than listed, just select the Custom Made Meshplate option and fill in your required volume to dispense. We will mill and anodize the Meshplate to your specifications. Dispensing is as easy to fill your entire rack with vials just within 30 seconds.

 

Your Dispenser is able to Dispense any type of Powder with an accurately within a maximum <3% error range, exceeding other high volume Powder Dispensing systems. Expand your production output in tubes, vials and plates, speeding up your process over 120 times instantly.

navigate-right.png

Advantages

  • Finish your experiments faster

  • Filling Tubes, Vials, Plates etc in only 30 seconds

  • Achieve accurate results

  • Sterile Dispensing

  • Start larger experiments

  • Accurate dispensing, <3% error rate

  • Easy cleaning

  • Reduces wrist pains

  • Exchangeable Powder Volume Meshplates, “Different volume or weight? Just slide in a different Meshplate

  • Custom made Meshplates available

navigate-right.png

Compatibility

Type of Containers

 

  • 45-Tubes (1.5 and 2mL screwcap and snapcap tubes)

  • 48-Tubes (1.5 and 2mL screwcap and snapcap tubes)

  • 96-well Microtiter plates

  • 96-Deepwell plates

  • 384-well plates

  • Custom containers

 

Example of Custom made dispensers:

  • 96-PCR strip

  • 6-Containers/Beakers

  • 4 - 6 and 12 x 50mL centrifugeTubes

  • 12 x 15mL centrifuge tubes

  • 2mL GC autosamples Vials

  • Special and confidential canisters

Cutom made to your wishes?
Contact us at support@labtie.com

navigate-right.png

General Information

The LabTIE Powder Dispenser is widely used to dispense all types of powders into: Vessels, vials, tubes or plates for small experiments and high throughput assays. Options are unlimited, for example: A Dispenser with a metal Volume Meshplate that can Dispenser 55mg of Powder A. Or a specific metal Volume Meshplate that is able to Dispense 500uL of your Powder.

Want to Dispense a specific weight instead of Volume?
Please contact us and send the powder to our company address. We will calculate your powder weight to volume ratio and design the Meshplate to Dispense your required powder mass per tube/well

 

 

Beating all current systems in flexibility, accuracy and speed.

The LabTIE Powder Dispenser is widely used to dispense a specific weight in volume of powder into  vessels, vials, tubes or plates for small experiments and high throughput assays. Dispensing a powder can be done using an analytical scale which is time-consuming and error-prone or using a powder dispensing robot which is slow and high in price. That is where the LabTIE Powder Dispenser comes in with its accuracy, speed and low in cost. The LabTIE Powder is being use in a broad range in research institutes, Life Science companies and pharma. Assays range from  DNA extraction, pre-filling vials for HPLC assays, toxicity assays until filling pharmaceutical grade compounds in pills for studies. A broad range of professional references, inspired by its accuracy, speed and flexibility. 

Product reviews

logo_nci_lab_solutions.jpg

Lauren

NSI Lab Solutions

The 45 tube Powder Dispenser from LabTIE arrived very quickly and was extremely well packaged. Everything works exactly as stated and my entire department is thankful to have such a helpful device. Our manufacturing process had bottlenecks before and now those are practically eliminated. I know it has paid for itself in a single week. I am so thrilled and plan on purchasing more when we need to expand.

logo_hp.jpg

 Katrina Walker
HP

 

The Powder Dispenser Kit and plates has been invaluable tool in our research. The ability to quickly and efficiently dispense reproducible volumes is priceless. The easily interchangeable mesh plates make changing volumes quick and easy. I use 96 well plates that are both square and circular well plate inlets. This tool works great for both! The dispenser is simple and user friendly. There was also very little aerated powder with this technique-making it an even safer method of dispensing powder. I don’t know how I would have reproducibly dispensed the same volume of powder into each of the 96 well plates! This tool is a game changer when dispensing powder.

logo_national_jewish_health.jpg

Elaine Epperson
National Jewish Health

I use the powder Dispenser KIT from LabTIE to make 100ul aliquots of 0.1mm zirconium beads for breaking up mycobacteria to extract DNA and RNA. This bead dispenser is a game changer. I previously dispensed beads by hand into microfuge tubes, which was imprecise, a big waste of plastic, and time-consuming. Now we use a 96 well format with the Dispenser KIT for the bead beating, and several research groups are breathing sighs of giggling relief with the new format. In addition, the LabTIE personnel have been a tremendous help –– Bas in particular –– in getting this set up to solve our bead-dispensing problems, tailored to the science we want to accomplish. Thanks, LabTIE!

A few of the Universities and Companies

using LabTIE Powder Dispensers in their labs

logo_university_of_edinburgh_business_sc
logo_nlr
logo_neon_therapeutics
logo_nci_lab_solutions
logo_msd
logo_national_jewish_health
logo_ludger
logo_hp
logo_dna_genotek
logo_boston_university
logo_dupont_pioneer
logo_adisseo
diageo
euroins
Vela
Synthetic genomics
CNRS
Botiss
Biospec
Abbott
Clariant